Nikon UPS Bedienungsanleitung PDF herunterladen (Seite 7)

UPS/400 . . . an IBM AS/400 UPS power monitoring system . . .

MAIN MENU

This is the main menu for UPS/400 that provides access to all other system functions. However, where the

user knows the display name, a menu transfer can be made directly to the desired system function. HELP

is available from all screens and cursor sensitive HELP is available where applicable.

Option

1. Work with UPS/400 System Attributes

: Permits user specification of system attributes used to control

UPS/400 during the UPS monitoring process. To use Option 1, the monitor cannot be active. If you

find that the monitor is active, select Option 3 to end the monitor and then proceed with Option 1. After

working with the UPS/400 System Attributes, restart the monitor using Option 2.

2. Start the UPS Power Monitor:

Selection of this option starts the UPS/400 power monitor. The

message “UPS/400 Power Monitor Started…” appears at the bottom of the Main Menu to confirm that

the monitor has been started.

3. End the UPS Power Monitor:

Selection of this option ends the UPS/400 power monitor. The message

“UPS/400 Power Monitor Ending…” appears at the bottom of the Main Menu to confirm that the

monitor is ending.

4. Remote System Maintenance:

Selection of this option allows the user to identify network AS/400s that

will be notified by the UPS/400 power monitor. The AS/400 that serves as the notifying AS/400 for the

network will not be listed in this table, but all other AS/400s in the network will be listed in the table.

5. Work with Monitor Status:

Selection of this option allows the user to work with active UPS/400 jobs as

well as review the overall status of the AS/400 activity. This screen is the same as the “Work with

Active Jobs” AS/400 command except that only UPS/400 jobs are listed.

6. Display Activity Log:

All activity is logged. Clearing messages from the log is at the discretion of the

user.

7. Work with Current Status:

Selection of this option displays the current UPS/400 system status. This

includes information such as remaining battery life, number of power failures since last recharge,

chronological logging of power down step processed, and other information pertinent to a systematic

power down process.

8. System Setup:

Selection of this option allows the user to work with setting the values that are global in

nature to the operations of UPS/400. This includes information specific to your type of UPS, as well as

requirements for system power down.

1 2 3 4 5 6 7 8 9 10 11 12 ... 28 29

Keine Kommentare

Nikon UPS Bedienungsanleitung Seite 7