40
Technical Notes
Status Lamp
Color Status Description
Green
On at the same
time
• Live images are being output.
• The camera is connected to a TV with an
HDMI cable.
Flashing at the
same time
• The camera is capturing a still image.
• The self-timer is counting down.
• Pairing is complete.
Flashing at the
same time
(once in 5
seconds)
The camera is on standby for connection with
a smart device (you can also use the camera
as-is). When you launch SnapBridge 360/170
on a paired smart device, the camera is
reconnected.
Flashing at the
same time
(twice in 5
seconds)
The camera is on standby for connection with
a remote control (you can also use the
camera as-is). When you turn on a paired
remote control, the camera is reconnected.
Alternately
flashing
The camera is in pairing standby mode for a
smart device.
Alternately
flashing
quickly
The camera is in pairing standby mode for a
remote control.
Red
On at the same
time
• The camera is recording a movie in
Standard movie mode.
• The camera is recording a movie in
Superlapse movie, Loop recording, or
Time-lapse movie mode (changes from
flashing 3 times to on).
Flashing at the
same time
• The camera is saving a movie.
• Pairing failed.
Quick flashing
at the same
time
• A memory card is not inserted.
• Out of memory.
• Output of live images is stopped because
the inside of the camera became hot
during output. When the camera has
cooled, output resumes automatically.
• The inside of the camera has become hot.
The camera turns off automatically. Wait
until the camera or battery temperature
has cooled before resuming use.
• The firmware version update failed.
Kommentare zu diesen Handbüchern