13
Using SnapBridge 360/170
Using SnapBridge 360/170
You can do the following when you pair the camera and a smart device
installed with the dedicated app, “SnapBridge 360/170”.
• Upload captured still images and movies to the smart device
• Use the smart device to perform remote photography or play back
images
• Change the camera settings
Camera
• Turn off the camera (A5). The camera cannot enter pairing standby mode when
the camera is on.
• Turn off the airplane mode switch (A1). You cannot pair when it is on.
• Use a sufficiently charged battery so that the camera does not turn off during the
procedure.
• Insert a memory card with sufficient free space.
• Disconnect the HDMI cable or USB cable.
Smart Device
• Enable Bluetooth and Wi-Fi on the smart device. If you will use NFC, enable NFC.
• Download and install the dedicated app, “SnapBridge 360/170,” from the Apple
App Store® for iOS or from Google Play™ for Android™.
- “SnapBridge” cannot be used with this camera.
- You can check the OS versions that SnapBridge
360/170 supports by visiting the download sites
above.
Preparing for Pairing
Kommentare zu diesen Handbüchern