7
Getting Started
B Notes About Charging with a Computer
When c Camera M Camera settings M Charge by computer is set to Auto in the
SnapBridge 360/170 app (A28), connecting the camera to a computer that is running will
automatically charge the battery inserted into the camera using power supplied by the
computer.
• When connected to a computer, the camera turns on and starts charging. The camera
cannot be operated with buttons during this time.
• About 3 hours and 30 minutes are required to charge a fully exhausted battery. Charging
time increases when images are transferred while the battery is charging.
• The camera turns off automatically if there is no communication with the computer for 30
minutes after the battery has finished charging.
Turning On the Camera
• Press and hold down the movie button for about
3 seconds to turn on the camera.
• Shooting starts when the camera turns on by
pressing the movie button or photo button.
• When the camera turns on, the power-on lamp
turns on.
• You can check the battery level by looking at the
power-on lamp (A2) or the SnapBridge 360/170
app screen.
Turning the Camera On or Off
Kommentare zu diesen Handbüchern