Nikon Fantasea FD-50N Bedienungsanleitung PDF herunterladen (Seite 17)

o Detach sync cords, arms & brackets for overnight storage.

This will greatly reduce the possibility of electrolysis and

corrosion that can build up between similar metals on the

housing.

o Dry with a clean towel or allow drying naturally in a cool

shady place.

• Traveling:

o Use protective hard case when traveling to protect the

camera and housing from impact damage.

o If possible, do not check camera and housing case on

airlines. Use a hard case that can fit under the seat or in the

overhead compartment of aircraft, and hand carry.

• Annual Maintenance and Storage:

o The housing’s main gasket and port O-ring should be

replaced every year or more often if used frequently. The

frequency of replacement depends on the user’s inspection

of these seals and their condition at the time. If in doubt, it

is always better to change them in order to not take the

chance of flooding the housing.

o The seals on each of the controls should be replaced every

couple of years or more often if needed. The best indicator

of the need for replacement is if the controls become harder

to operate due to a build up of salt or corrosion.

o Store housing in a cool, dry location when not traveling. It

is recommended that the housing be stored with the two

halves together, but not with the latching buckles closed.

This will take the constant compression off the main gasket.

It is also recommended that the housing is not stored with

the port mounted.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22

Keine Kommentare

Nikon Fantasea FD-50N Bedienungsanleitung Seite 17