Nikon COOLPIX S800c Bedienungsanleitung PDF herunterladen (Seite 119)

Using Easy Panorama (Shooting and Playback)

Reference Section

Example of Camera Movement

• The operator, without shifting position, moves the camera horizontally or

vertically in an arc so that the guide travels from one edge to the other.

• Shooting stops if the guide does not reach the edge within about 15 seconds

(when

Normal (180°) is selected) or within about 30 seconds (when

Wide (360°) is selected) after shooting starts.

B Notes About Easy Panorama Shooting

• The range of the image seen in the saved image will be narrower than that seen in the monitor at

the time of shooting.

• If the camera is moved too quickly or shaken too much, or if the subject is too uniform (e.g. walls or

darkness), an error may occur.

• If shooting stops before the camera reaches the halfway point in the panorama range, a panorama

image is not saved.

• If more than half of the panorama range is captured but shooting ends before reaching the edge

of the range, the range not captured is recorded and displayed in gray.

C Changing the Shooting Range

• In easy panorama scene mode, press the d button,

tap p, and tap W Normal (180°) or X Wide

(360°).

• When the camera is held in the horizontal position

during shooting, the image size (width × height) is as

follows:

- Normal (180°): 3200 × 560 when moved horizontally,

1024 × 3200 when moved vertically

- Wide (360°): 6400 × 560 when moved horizontally, 1024 × 6400 when moved vertically

- When the camera is held in the vertical position during shooting, the direction and the width

and height are switched.

Easy panorama

Normal (180°) Wide (360°)

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 223 224

Keine Kommentare

Nikon COOLPIX S800c Bedienungsanleitung Seite 119