Nikon LS-4500AF Bedienungsanleitung PDF herunterladen (Seite 53)

Nikon

Film Scanner LS-4500AF User's Manual

When a mount is set in the tray for four frames, first slide the sliding spring

catch and carefully open the mount holding plate. The frame supports

itself in the upright position. If there is any mount for which scanning has

been completed, remove it.

Put the mount on the mount plate after positioning it by means of the

slightly raised bars; close the mount holding plate carefully; fix the mount

holding plate firmly in place with the sliding spring catch. Make sure that

the emulsion side is facing downward.

Note: If there are fewer than four images to be scanned, add dummy films.

Proper scanning may not be performed if any transparent area is left.

Step 3

The arrow indicates the scanning direction. Rotate the turntable to set the

image angle.

For fine adjustment, refer to the angle index marked on the edge of the

turntable. The index may not match over the entire circumference.

Mount Holding

Plate

Sliding

Spring Catch

6. Using the Film Holder

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 73 74

Keine Kommentare

Nikon LS-4500AF Bedienungsanleitung Seite 53