Nikon LS-4500AF Bedienungsanleitung PDF herunterladen (Seite 41)

Nikon

Film Scanner LS-4500AF User's Manual

4.4 Setting the SCSI ID

The SCSI ID for the LS-4500AF is set at “5” when the unit is shipped. If

other SCSI devices are connected to your computer, make sure that the

SCSI ID for the LS-4500AF is different from those assigned to other SCSI

devices.

SCSI ID

Note that in the case of a host computer which has a built-in SCSI hard

disk or built-in CD-ROM, the ID numbers of the host CPU and each SCSI

device have already been assigned.

If the IDs are the same, you must change the ID number of the other SCSI

device or the ID of the LS-4500AF to avoid any conflict.

Remarks

• To change the ID, confirm that the LS-4500AF power is off. The ID

cannot be changed when the power is on.

• As 7 has been assigned for the CPU and 0 has been assigned to the

built-in hard disk for a Macintosh, and 0 and 7 have also been assigned

to other personal computer systems, any number from 1 to 6 is recom-

mended for the ID number.

• If the same ID numbers are assigned, the system might not function, or

important data on the hard disk might be destroyed. It is therefore

essential to check the ID numbers carefully before connecting the LS-

4500AF.

4. Connecting the LS-4500AF

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 73 74

Keine Kommentare

Nikon LS-4500AF Bedienungsanleitung Seite 41