Nikon LS-4500AF Bedienungsanleitung PDF herunterladen (Seite 38)

Nikon

Film Scanner LS-4500AF User's Manual

If the unit is the only connected SCSI device, or if the unit is connected at

the end of the SCSI chain, attach a terminator (terminal resistance) to the

other SCSI connector. At this point, remove the terminator of the other

SCSI device that has been placed between them. The terminator is not

needed when the unit is connected between other SCSI devices.

When SCSI devices are connected, connect them so as not to make a loop,

and attach terminators to both ends of the SCSI chain. Since the terminator

is built into the host computer in most cases, the host computer should be at

the end of the SCSI chain. The operation manuals of some notebook

computers require a terminator to be attached outside the computer; please

refer to the operation manual for the computer to which the unit is con-

nected.

Note: The SCSI cable used for SCSI connection should be of high-imped-

ance type.

Terminator

4. Connecting the LS-4500AF

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 73 74

Keine Kommentare

Nikon LS-4500AF Bedienungsanleitung Seite 38