Nikon LS-30 Bedienungsanleitung PDF herunterladen (Seite 46)

- 46 -

Troubleshooting

Problem: the scan window controls are grayed out or

a “no adapter” or “no media” error appears when

you attempt to scan an image using Nikon Scan

Check that there is an adapter in the device and that it is fully

inserted in the adapter slot. The scanner will not recognize the

SA-20 or optional IA-20 adapter unless the connector on the

rear of the adapter is fully inserted in the connector at the back

of the adapter slot. If the adapter is in place, check that the film

is properly inserted in the adapter.

Problem: the quality of scanned images is poor

Checklist:

• Is there dust on the film?

Remove dust from the film with a blower and scan the

image again.

• Is the film to be scanned properly inserted in the scanner?

Reinsert the film and try again.

• Did you move the film or scanner while scanning was in

progress?

Do not attempt to insert or remove film while scanning is in

progress. Moving the scanner while the status LED is flashing

could cause malfunction. Install the scanner in an environ-

ment free of vibration and shocks.

• Are you using the software correctly?

Refer to the User’s Guide and software reference manuals for

details on how to adjust image quality prior to scanning.

1 2 ... 41 42 43 44 45 46 47 48 49

Keine Kommentare

Nikon LS-30 Bedienungsanleitung Seite 46