Nikon WT-3 Bedienungsanleitung PDF herunterladen (Seite 59)

Troubleshooting

Problem Solution

“POWER” LED does not light.

• Conﬁ rm that battery is inserted in WT-3 and is fully

charged.

• Reattach WT-3.

• Insert memory card (transfer and print modes

only).

• Turn camera on.

• Press shutter-release button halfway to activate ex-

posure meters.

• Select On for Wireless transmitter > Wireless

LAN system option in camera setup menu.

• Open connection to printer (print mode only).

21, 30

—

All LEDs blink at once.

WT-3 hardware error. Contact a Nikon-authorized

service representative.

25, 29,

Wireless transmitter option

not available.

• Reattach WT-3.

• Select PTP for USB option in camera setup menu.

Excessive radio interference. Change orientation of camera or antenna. 4

Camera displays “Ethernet ca-

ble is not connected.”

Connect Ethernet cable or change interface setting

to Wireless & Ethernet.

4, 13,

Camera displays wireless error.

• Conﬁ rm that host and wireless LAN adapter are on.

• Ensure that there are no obstacles between WT-3

and wireless LAN adapter.

• Check settings for host and / or wireless LAN adapter

and adjust camera settings appropriately.

—

14, 35

Camera displays TCP/IP or FTP

error.

• Check settings for host and / or wireless LAN adapter

and adjust camera settings appropriately.

• Check ﬁ rewall settings.

14, 35

16, 48

Memory card error displayed. Conﬁ rm that memory card is properly inserted. 21, 30

Photos can not be trans-

ferred to computer to which

PictureProject has been in-

stalled.

• PictureProject version is incorrect. Update to latest

version or install version supplied with D200.

• Macintosh: If PictureProject was installed after WT-3

Setup Utility, reinstall WT-3 Setup Utility.

—

Transfer interrupted before all

photographs are sent.

Transfer will resume if camera is turned oﬀ and then

on again, exposure meters are reactivated, or On for

Wireless transmitter > Wireless LAN system.

Error displayed stating that no

images are available for print-

ing.

Only JPEG images can be printed from the camera.

Transfer RAW (NEF) images to computer and print

them from PictureProject or Nikon Capture version

4.4 or later.

—

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 65

Kommentare zu diesen Handbüchern

Keine Kommentare

Nikon WT-3 Bedienungsanleitung Seite 59

Kommentare zu diesen Handbüchern