Nikon WT-3 Bedienungsanleitung PDF herunterladen (Seite 36)

Controlling the Camera Using Nikon Capture 4

Ethernet Networks: Do Not Disconnect the Ethernet Cable

Do not disconnect the Ethernet cable while the camera is on.

Wireless Networks: Loss of Signal During Transfer

A loss of signal may interrupt the connection while pictures are being transferred to Nikon

Capture 4 Camera Control. If the POWER LED on the WT-3 is blinking ( 29), select Oﬀ for the

Wireless transmitter > Wireless LAN system option in the camera setup menu and then

select On again. Transfer will resume when the connection is re-established. Do not turn the

camera oﬀ . Transfer can not be resumed once the camera is turned oﬀ .

Complete the steps in “Connecting to a Computer” ( 26).

Start Nikon Capture 4 Camera Control on the host

computer and conﬁ rm that is displayed in the

camera control panel.

Control the camera as described in the Nikon Cap ture 4 User’s Man u al. Any

photographs taken while the camera is connected will be recorded directly

to the computer hard disk.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 64 65

Keine Kommentare

Nikon WT-3 Bedienungsanleitung Seite 36