Nikon WT-3 Bedienungsanleitung PDF herunterladen (Seite 28)

Insert the battery as shown on the inside of the

battery chamber cover. The battery latch will slide

aside during insertion and pop up to lock the bat-

tery in place when fully inserted.

Inserting the Battery

To power the camera when the WT-3 is in place, insert the camera battery into the

WT-3 battery chamber. The WT-3 takes one EN-EL3e rechargeable Li-ion battery;

other batteries can not be used. Note that the drain on the battery is increased

when the WT-3 is attached.

The EH-6 AC Adapter

The optional EH-6 AC adapter can also be used to power the

camera when the WT-3 is connected. Connect the DC plug

on the AC adapter to the WT-3 DC-IN connector, not to the

camera.

Open the battery chamber cover.

Close the battery-chamber cover. Make sure the

cover is properly latched. The latch will click into

place when the cover is fully closed.

Turn the camera on and check the battery level in

the control panel or viewﬁ nder or using the Bat-

tery Info option in the camera setup menu.

Turn the camera oﬀ and rotate the control lock on

the WT-3 to the L position.

Removing the Battery

Being careful not to drop the battery, open the battery cham-

ber cover and remove the battery as shown at right.

Batery latch

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 64 65

Keine Kommentare

Nikon WT-3 Bedienungsanleitung Seite 28