Nikon WT-3 Bedienungsanleitung PDF herunterladen (Seite 22)

Choose from the following options.

• Automatic setup (recommended): If more than one

network adapter is available, choose an adapter

from the pull-down menu (if Ethernet only is

selected in Step 7, the menu will list Ethernet

adapters only). Click Next. If Ethernet and

Wireless was selected in Step 7 and the com-

puter is conﬁ gured for use with an existing in-

frastructure network, you will be prompted either to choose an existing

infrastructure network or to set up a new ad-hoc network for use with the

camera; select the desired option and click Next. If FTP server was se-

lected in Step 7, proceed to Step 11. Otherwise proceed to Step 12.

• Manual setup (for advanced users): To adjust settings manually, select this option

and click Next. If Ethernet and Wireless was selected in Step 7, proceed

to Step 9. Otherwise proceed to Step 10.

Enter wireless network settings and click Next.

• Network name (SSID): Enter a network name or choose

from a list of existing networks ( 36). Do not change

the name if it is supplied automatically.

• Network type: Infrastructure or ad-hoc ( 36).

• Channel (ad-hoc networks only): Choose the channel

(1–13) used by the host. If channel 12 or 13 is selected

for the WT-3A, channel 11 will be used instead.

• Authentication: Choose the type of authentication used

by the computer or access point. The camera supports WPA-PSK, WPA2-PSK, open

system, and shared key authentication. WPA-PSK and WPA2-PSK are available only in

infrastructure mode.

• Encryption: Choose the type of encryption used on the network. Depending on the

authentication used, the following types of encryption are available:

Open: none, 64-bit WEP, 128-bit WEP Shared: 64-bit WEP, 128-bit WEP

WPA-PSK: TKIP, AES WPA2-PSK: AES

• Encryption key: If the network uses encryption, enter the network key. The number of

the characters required depends on the type of encryption used:

WEP (64-bit) WEP (128-bit) TKIP, AES

Number of characters (ASCII) 5138–63

Number of characters (hexadecimal) 10 26 64

• Key index: In infrastructure networks that use WEP encryption, enter the host or access

point key index. The default index is 1.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 64 65

Keine Kommentare

Nikon WT-3 Bedienungsanleitung Seite 22