Nikon WT-3 Bedienungsanleitung PDF herunterladen (Seite 11)

System Requirements

Before using the WT-3 or WT-3 Setup Utility CD, conﬁ rm that your system meets the

following requirements:

Camera

• Model: Nikon D200 digital single-lens reﬂ ex camera

• Firmware: A and B version 2.00 (provided on supplied WT-3 Setup Utility CD)

Power source

One EN-EL3e rechargeable Li-ion battery (supplied with D200) or EH-6 AC

adapter (available separately)

• To connect to a computer: Windows XP Service Pack 1 or later (Service Pack 2 rec-

ommended) or Mac OS X version 10.3 or later required (Power PC G4/G5 CPUs

only). Connection to computers on other networks via router not supported.

• To upload pictures to an ftp server: Operation has been conﬁ rmed with Windows XP

Professional and Mac OS X version 10.3 or later. Under these operating sys-

tems, ftp servers can be conﬁ gured using standard ftp services such as IIS (In-

ternet Information Services). Internet ftp connections and ftp servers running

third-party software are not supported.

Network

• Wireless: Wireless LAN access point or computer with built-in or external wire-

less LAN adapter (IEEE 802.11b or 802.11g compliant).

• Ethernet: Ethernet cable and computer with built-in or external Ethernet port

(100 base-TX or 10 base-T)

Miscellaneous

• WT-3 Setup Utility: required to copy computer proﬁ les to camera (camera can be

conﬁ gured for use with ftp servers using either WT-3 Setup Utility or camera

menus). WT-3 Setup Utility can not be used to conﬁ gure camera for use with

optional PD-10 wireless printer adapter.

• CD-ROM drive: required when installing WT-3 Setup Utility

• USB: UC-E4 USB cable (included with camera) and computer with built-in USB

port required when copying network proﬁ les to camera.

1. For the latest information on supported operating systems, see the Nikon website for your

area ( 1).

2. For information on wireless network settings for Windows XP Professional and Mac OS X,

see the online help for the WT-3 Setup Utility.

3. Connect the camera directly to the computer. The camera may not function as expected

when connected via a hub, extension cable, or keyboard.

The PD-10 Wireless Printer Adapter

A PictBridge-compatible printer with a ﬂ at (type A) USB connector is required for connection

to the PD-10. A computer is not required.

Multiple Transmitters

Simultaneous use of multiple WT-3 wireless transmitters with a single host may produce un-

expected results. Do not attempt to use more than one WT-3 per host.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 64 65

Keine Kommentare

Nikon WT-3 Bedienungsanleitung Seite 11