Nikon Coolpix 300 Bedienungsanleitung PDF herunterladen (Seite 99)

Connections : Making a SCSI Connection

Once you have connected your camera to the SCSI chain, turn on the

camera and other external SCSI devices and then turn on the computer. If

you have installed the Nikon View software provided with your COOLPIX

300, you will now be able to use the software to view the contents of the

camera’s memory or to transfer images and recordings to disk for long-

term storage. Refer to the Nikon View User’s Manual.

Note: While your COOLPIX 300 is being controlled by Nikon View, the

camera’s touch-panel display will not respond to the stylus and the record

and shutter-release buttons will be deactivated.

Caution: When turning the computer off, turn the computer off before

turning off any peripheral devices. Remove the SCSI cable from the

camera and computer only after both devices have been turned off. When

removing the cable from the camera, care should be taken not to damage

the latches that hold the cable in place. Unplug the cable by the

connectors; do not pull on the cable itself. Do not bend or twist the cable,

as this may cause the cable to break.

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 115 116

Keine Kommentare

Nikon Coolpix 300 Bedienungsanleitung Seite 99