Nikon Coolpix 300 Bedienungsanleitung PDF herunterladen (Seite 40)

First Steps : Taking Your First Photograph

The amount of memory available for making further recordings is shown

as a percentage next to the REMAINING MEMORY item (fractions of less

than one percent are rounded down). PICTURES indicates the number of

photographs or memos that could be recorded at the current quality setting

if all available memory were used to store images. When this number

reaches zero, you will need to transfer the recordings in memory to a

computer or delete all or some of the stored items before you will be able

to take more photographs. If there is no memory available when the

camera is turned on, or if there is not enough memory to record a picture at

the current image quality when the shutter-release button is pressed, the

camera will display a message warning you that memory is full (see

“Troubleshooting”).

Step 3 - Put the camera in recording mode

You can only take photographs when the camera is in recording

mode. The camera enters recording mode automatically ten seconds after

having been turned on, or when you use the stylus to select OK from the

lower right corner of the status window (you can also make the camera

enter recording mode by selecting RECORDING from the COOLPIX

300’s main menu). When the camera is in recording mode, the READY

lamp will glow steadily and the main display window in the touch-panel

will show the view through the lens.

[ 66]

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 115 116

Keine Kommentare

Nikon Coolpix 300 Bedienungsanleitung Seite 40