Nikon NP4100 Bedienungsanleitung PDF herunterladen (Seite 110)

5. Using On-Screen Display

ITEM DESCRIPTION

Color System

Select the default Color System to use for Video or S-Video input.

Range: Auto, NTSC3.58, NTSC4.43, PAL, PAL-M,

PAL-N, PAL60, SECAM (see page 99).

WXGA Mode

Select WXGA mode (see page 99).

Source

Display

Select the message display such as Computer 1, Computer 2, Computer 3,

Component, Video, and No Input to be displayed on the top right of the

screen.

Range: On or Off (see page 99).

Control ID

Set the Remote Control ID code.

Range: 1~254 (see page 100).

Filter Message

Set this item to on to have the projector display a message when the air

filter needs servicing.

Range: Off, 100[H], 200[H], 500[H], 1000[H] (see page 100).

Auto Power On (AC)

Auto Power On (AC) enables the projector to start automatically when the power cable is

connected to an active power outlet and the main power switch is on. This eliminates the

need to always use the POWER (ON/STANDBY) button on the remote control or projec-

tor cabinet. To use the Auto Power On (AC) function, you must first press the main

power switch to On before connecting the power cable.

Note:

When the projector is off by using the POWER button (or put in the standby

mode) and the power cable is disconnected, Auto Power On (AC) will not activate

after power (AC) is applied.

When the projector is off by using the Direct Power Off function or after the

power (AC) is removed (no standby mode), Auto Power On (AC) will be activated

after power (AC) is applied.

The Direct Power Off function means you can turn off the power (AC) to the

projector by using a power strip equipped with a switch and a breaker.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 157 158

Keine Kommentare

Nikon NP4100 Bedienungsanleitung Seite 110