Nikon LT170 Bedienungsanleitung PDF herunterladen (Seite 34)

E-34

USING ON-SCREEN MENU

Displays the status of the current signal and lamp usage. This item has

four pages. The information included is as follows:

Information Default

Returning to Factory Default [Factory Default]

The Factory Default feature allows you to change adjustments and set-

ting to the factory preset for source except the following:

Resets the adjustments for the current signal to the factory preset levels.

The items that can be reset are: Brightness, Contrast, Color, Hue, Sharp-

ness, Aspect Ratio, Horizontal Position, Vertical Position, Clock, Phase

and Picture Management.

Reset all the adjustments and settings for all the signals to the factory

preset.

The items can be reset except Language, Security, Remaining Lamp

Time, Lamp Hour Meter and Projector Usage. To reset the lamp usage

time, see “Clear Lamp Hour Meter” .

Clearing Lamp Hour Meter [Clear Lamp Hour Meter]

Resets the lamp clock back to zero. Selecting this option displays submenu

for a confirmation.

NOTE: The projector will turn off and go into standby mode after 1600 hours (up

to 2100 hours in Eco mode) of service. If this happens, press the “HELP” button

on the remote control for ten seconds to reset the lamp clock back to zero. Do this

only after replacing the lamp.

* The progress indicator shows the percentage of remaining lamp life.

The value informs you of the amount of lamp usage. When the remain-

ing lamp time reaches 0, the Remaining Lamp Time bar indicator

changes from 0% to 100 Hours and starts counting down.

If the remaining lamp time reaches 0 hours, the projector will not turn

on regardless of whether the lamp mode is set to Normal or Eco.

[Page 1]

Source Index

Horizontal Frequency

Vertical Frequency

Sync Polarity

[Page 2]

Signal Type

Video Type

Sync Type

Interlace

[Page 3]

Remaining Lamp Time (%)*

Lamp Hour Meter (H)

Projector Usage

[Page 4]

Version (BIOS/Firmware/Data/GUI)

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 44 45

Kommentare zu diesen Handbüchern

Keine Kommentare

Nikon LT170 Bedienungsanleitung Seite 34

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Projektoren Nikon LT170