Nikon HT1000 Bedienungsanleitung PDF herunterladen (Seite 7)

E-7

910 45 11

678 121 3

Top Features

1. POWER Button (ON / STAND BY) ( )

Use this button to turn the power on and off when the main power is

supplied and the projector is in standby mode.

NOTE: To turn on or off the projector, press and hold this button for a mini-

mum of two seconds.

2. STATUS Indicator

If this light blinks red rapidly, it indicates that an error has occurred,

the lamp cover is not attached properly or the projector has over-

heated. If this light remains orange, it indicates that you have pressed

a cabinet key while the Control Panel Key Lock is enabled. See the

Status Indicator section on page E-50 for more details.

3. POWER Indicator

When this indicator is green, the projector is on; when this indicator

is orange, it is in standby or idle mode. See the Power Indicator sec-

tion on page E-50 for more details.

4. SOURCE Button

Use this button to select a video source such as a VCR, DVD player,

PC or Viewer (PC card).

Press and release this button quickly to display the Source List.

Each time this button is pressed for a minimum of ONE second the

input source will change as follows:

Video → S-Video → Component → RGB → DVI (DIGITAL) → Viewer →

Video → ...

If no input signal is present, the input will be skipped.

5. AUTO ADJUST Button

Use this button to adjust Position-H/V and Pixel Clock/Phase for an

optimal picture. Some signals may not be displayed correctly or take

time to switch between sources.

NOTE: This function may not be available depending upon the input signal.

6. PC CARD Access Indicator

Lights while accessing a PC card.

7. ENTER Button

Executes your menu selection and activates items selected from the

menu.

8. CANCEL Button

Press this button to exit "Menus". Press this button to return the ad-

justments to the last condition while you are in the adjustment or

setting menu.

9. SELECT 왖왔왗왘 (+) (–) / Volume Buttons

왖왔 : Use these buttons to select the menu of the item you wish to

adjust. When no menus appear, these buttons work as a vol-

ume control.

왗왘 : Use these buttons to change the level of a selected menu item.

A press of the 왘 button executes the selection. When the menus

or the Viewer tool bar is not displayed, these buttons can be

used to select a slide, or to move the cursor in Folder List or

Slide List.

10. MENU Button

Displays the menu.

11. LAMP Indicator

If this light blinks red rapidly, it's warning you that the projection lamp

has exceeded 1500 hours (up to 2000 hours in Eco mode) of service.

After this light appears, replace the lamp as soon as possible. (See

page E-48). If this is lit green continually, it indicates that the lamp

mode is set to Eco. See the Lamp Indicator section on page E-50 for

more details.

12. 3D REFORM Button

Press this button to enter 3D Reform mode to correct the keystone

(trapezoidal) distortion, and make the image square.

1 2 3 4 5 6 7 8 9 10 11 12 ... 60 61

Kommentare zu diesen Handbüchern

Keine Kommentare

Nikon HT1000 Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Projektoren Nikon HT1000