Nikon HT1000 Bedienungsanleitung PDF herunterladen (Seite 43)

E-43

An IP address can be automatically assigned to this projector by your

DHCP server. If your network does not automatically assign IP address,

ask your network administrator for an address, and then register it manu-

ally.

Automatic ....... Automatically assigns an IP address to the projector

from a DHCP server.

Manual ........... Provides a space for you to register the IP address or

subnet mask number obtained from your network ad-

ministrator.

IP Address ..... Set your IP address. Press

to display the software

keyboard and type in 12 numeric characters.

Subnet Mask .. Set your subnet mask number. Press

to display

the software keyboard and type in 12 numeric char-

acters.

Projector Name

....................... Specify a unique projector name. Press

to display

the software keyboard and type in. Up to 16 alphanu-

meric characters can be used.

Gateway ......... Set the default gateway of the network connected to

the projector. Press

to display the software key-

board and type in 12 numeric characters.

Checking this box will make the set default route valid.

When data is sent from the LAN card, the transfer

location will be searched according to the previously

set routing information; however, when the transfer

location has not been found as a result of the search,

the data will be sent to the device that holds the IP

address set here. The IP address that is set here must

be one that can be identified by a search of the rout-

ing information.

DNS Configuration

....................... Type in the IP address of DNS server on the network

connected to the projector. 12 numeric characters are

used.

Domain Name Type in domain name of the network connected to

the projector. Up to 60 alphanumeric characters can

be used.

Screen Type:

Select either 4:3 Screen or 16:9 Screen for the screen to be used.

See also "Aspect Ratio" on pages E-36 and 37.

NOTE: When "Resultion" is set to "Native", this selection is inactive.

Position:

This feature adjusts the vertical position of the image when viewing

video with an aspect ratio selected.

When some aspect ratios are selected in Image Options, the image

is displayed with black borders on the top and bottom.

You can adjust the vertical position between top and bottom.

NOTE: This option is available only when "16:9" is selected in Screen Type.

NOTE: During 3D Reform adjustment, "Screen Type" and "Screen Position"

may not be available. To make available, first reset the 3D Reform data and

then do settings again. Secondly repeat the 3D Reform adjustment. Changing

"Screen Type" and "Screen Position" can limit 3D Reform in its adjustable

range.

Selecting Aspect Ratio and Position for Screen [Screen]

Setting LAN Mode

This feature allows you to set various setting items when the projector is

used on your network.

Consult with your network administrator about these settings.

CAUTION: Make sure that the LAN card is removed during Standby

mode (NOT Idle mode) or with the main power off.

Failure to do so may cause damage to the data on your PC card.

Note to Users of a PCMCIA network card

Use of a non-supported network card in the projector may cause the

unit to malfunction.

Should this happen, turn off the projector and remove the network card

from the projector's PC card slot.

NOTE: LAN card is not available when a PC card is used for the Viewer function.

Viewer is not available when LAN card is used for LAN connection.

IP Address

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 60 61

Kommentare zu diesen Handbüchern

Keine Kommentare

Nikon HT1000 Bedienungsanleitung Seite 43

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Projektoren Nikon HT1000