Nikon MSV-01 Bedienungsanleitung PDF herunterladen (Seite 22)

Basic Operation—Inserting a Memory Card

Basic Operation

Inserting a Memory Card

To copy image data from a memory card to the MSV-01 or from the MSV-01 to a memory card,

insert a CompactFlash™ memory card into the memory card slot.

Removing Memory Cards

Memory cards can be removed without loss of data when the MSV-01 is off. To remove a memory card,

turn the MSV-01 off and confirm that the power-on lamp is off or, if the AC adapter is connected, is lit or

flashing orange. Then grasp the protruding section of the memory card, and pull it out.

Note that memory cards may become hot during use. Observe due caution when removing memory

cards from the MSV-01.

Supported Memory Cards

The memory card slot accepts CompactFlash™ memory cards (Type I and II).

On memory cards approved for use with the COOLWALKER MSV-01 see "Approved Memory Cards"

( 57).

1 Turn the MSV-01 off

Confirm that the monitor is off and the power-on lamp is off

or, if the AC adapter is connected, is lit or flashing orange

( 10).

2 Open the memory card slot cover

Gently slide the memory card slot cover downwards to expose

the memory card slot.

3 Insert a memory card

Insert a memory card into the memory card slot in the direc-

tion shown on the illustration.

Insert the memory card firmly, but without excess force.

(When correctly inserted, a CompactFlash™ memory card

protrudes approximately 12 mm from the MSV-01 main unit.)

Inserting Memory Cards

• Insert the memory card terminals first. Inserting the card

upside down or backwards could damage the MSV-01 or the

card. Check to be sure that the card is in the correct orienta-

tion.

• Perform all operations on a table or any other stable flat sur-

face to avoid dropping the MSV-01 or memory cards.

Front

Terminals

Direction of

insertion

12mm

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 79 80

Keine Kommentare

Nikon MSV-01 Bedienungsanleitung Seite 22