Nikon WT-4 Bedienungsanleitung PDF herunterladen (Seite 77)

Upload pictures to a host computer / Uploading Images

Using the WT-4 with a Computer

3 Turn the WT-4 off and wait for the

POWER LED (pg. 3) to turn from green to

yellow and then go out. Disconnect the

USB cable. The destination folder

selected in the Setup Utility (pg. 50) will

open automatically when the

connection between the computer and

the WT-4 is terminated.

❏ Interrupting Transmission

To cancel transmission of images marked with a white “send” icon

or green “sending” icon, select the images during playback and

press the center of the multi selector while pressing the button

(D3) or the button (D300). The icon will be removed. Any of the

following actions will also interrupt transmission:

• Turning the camera or WT-4 off

• Selecting [Yes] for [Wireless transmitter] > [Transfer

settings] > [Deselect all?]

D During Upload

Do not remove the memory card or disconnect the Ethernet cable during

upload.

A Voice Memos

Voice memos can not be uploaded separately, but will be included when

associated pictures are transmitted. Voice recordings can not be selected

for upload.

A Loss of Signal

Transmission may be interrupted if the signal is lost (pg. 77). Transmission

can be resumed by turning the WT-4 off and then on again.

A Turning the Camera Off

“Send” marking will be saved if the camera or WT-4 is turned off while

transmission is in progress. Transmission of images marked with a “send”

icon will resume when the camera or WT-4 is turned on.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 198 199

Keine Kommentare

Nikon WT-4 Bedienungsanleitung Seite 77