Nikon WT-4 Bedienungsanleitung PDF herunterladen (Seite 46)

Configuring the Network / Windows XP / Connecting to an Infrastructure Network

Introduction36

6 After entering a network name and choosing security options

to match those selected for the wireless LAN access point,

remove the check from [This is a computer-to-computer (ad

hoc) network; wireless access points are not used] and click

[OK].

• Network name (SSID): Enter a name of up to 32 characters.

• Network Authentication: Choose from [Open], [Shared], [WPA],

and [WPA-PSK].

• Data encryption: The type of encryption available depends on

the options selected for [Network Authentication]:

❏ Open, Shared: [WEP], [Disabled]

❏ WPA, WPA-PSK: [TKIP], [AES]

• Network key: If [WEP] is selected for [Data encryption], enter a

5- or 13-character ASCII key or 10- or 26-digit hexadecimal

key. Entering a five-character ASCII or ten-digit hexadecimal

key enables 64-bit encryption, a 13-character ASCII or 26-

digit hexadecimal key 128-bit encryption. ASCII keys may

contain letters, punctuation, and the numbers 0–9,

hexadecimal keys the numbers 0–9 and the letters a, b, c, d,

e, and f. If [TKIP] or [AES] is selected for [Data encryption],

enter an ASCII key of 8 to 63 characters or a 64-digit

hexadecimal key.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 198 199

Keine Kommentare

Nikon WT-4 Bedienungsanleitung Seite 46