Nikon P-TACTICAL SUPERDOT Bedienungsanleitung PDF herunterladen (Seite 10)

Mounting the sight

The P-TACTICAL SUPERDOT can be mounted on a Picatinny rail. You can change the mount height (four options available) using the included spacers. For more

information, see the next page.

CAUTION

• Make sure the firearm is unloaded. Use safe firearm handling practices at all times.

• Be sure to allow several inches of clearance between the sight’s eyepiece and your eye to avoid injury due to recoil.

1. Use the included hex key to loosen the hex bolt.

2. Slide the sight on the Picatinny rail.

3. Attach the mounting bracket as described in the illustration.

4. Tighten the hex bolt with the tightening torque of 15 to 20 lbf·in (1.7 to 2.3

N·m).

Make sure that the pointed edge of the

mounting bracket is at the bottom.

Picatinny rail

Hex bolt

Dot sight

Mounting

bracket

Notice:

• If you fail to mount the sight properly, the sight may detach, causing accidents or other injuries.

• The bolt may become loose due to recoil. Check the position of the tightness guide mark on the hex bolt before using the sight. If the position of the mark has

changed, tighten the bolt again.

Tightness guide mark

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Nikon P-TACTICAL SUPERDOT Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern