Nikon 9000ED Bedienungsanleitung PDF herunterladen (Seite 68)

Insert masking sheets

When scanning one or two strips or

strips of different lengths, place the ﬁ lm

at the left end of the holder and cover

any open apertures with the supplied

masking sheets, cutting the sheet to the

appropriate length if necessary. When

scanning one or two strips, place the

ﬁ lm in the bottom rows and the masking

sheets in the top rows.

When scanning three strips of equal

length, place the ﬁ lm at the left end

of the holder. Masking sheets are not

required.

Latch the holder

Press the holder closed until the latches

click into place.

Removing Film

Insert your ﬁ ngers into the holes in the lower

portion of the holder and undo the latches.

Open the holder and use the cutouts to pick

the ﬁ lm up by its edges. If the edges of the

ﬁ lm are not accessible, tilt the holder to slide

the ﬁ lm to the hollow at the end of the lower

holder.

Cutouts

Hollow

Masking sheets

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 88 89

Keine Kommentare

Nikon 9000ED Bedienungsanleitung Seite 68