Nikon 9000ED Bedienungsanleitung PDF herunterladen (Seite 41)

Step 4 — Insert the Holder

Step 4 — Inser t the Holde r

Check the status LED

Make sure that the status LED is glowing

steadily. Do not insert ﬁ lm holders while

the status LED is blinking.

Find the arrow on the front of the holder

The front each holder is marked with

an embossed arrow showing the direc-

tion of insertion. When the holder is

inserted, the side with the arrow should

face up with the arrow pointing toward

the scanner.

Calibration

The scanner is automatically calibrated at regular intervals if left on with no holder in place. Calibration

will end when a holder is inserted.

Arrow

Insert the holder

Keeping the holder straight, slide the it

into the holder slot with the arrow up

and facing toward the scanner. Once

the holder has been inserted as far as the

insertion guides, the automatic loading

mechanism will activate. Remove your

hands from the holder when loading

starts. When loading stops, the holder

is in scanning position.

Inserting Holders

If the loading mechanism is does not ac-

tivate, remove the holder and try again.

Do not use force. Once loading has

begun, do not interfere with the load-

ing mechanism. Attempting to remove

the holder during loading or otherwise

interfering with the mechanism could

cause scanning errors.

Insertion guide

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 88 89

Keine Kommentare

Nikon 9000ED Bedienungsanleitung Seite 41