Nikon 9000ED Bedienungsanleitung PDF herunterladen (Seite 37)

2.2

Insert ﬁ lm

Place ﬁ lm in the holder with the reﬂ ec-

tive ﬁ lm base up (matte emulsion sur-

face down; 26) and with the end of

the ﬁ lm against the stops.

FH-835M Holder for 35-mm Slides

The FH-835M can be used to scan up to ﬁ ve 35-mm slides with mounts 1.0–3.2 mm

thick. Slide the mounts into place between the guides, short side ﬁ rst and with the

reﬂ ective ﬁ lm base up (the matte emulsion surface down; 26). Stop when the slides

contact the base of the clips.

Inserting Slides

Insert slides between the guides. Forcing the slides onto the guides could damage the

slides or clips and prevent the scanner from focusing correctly. To minimize resistance,

try inserting slides at a slight angle.

Be sure a slide is inserted in the ﬁ rst slot. Leaving the aperture at the left end of the hold-

er uncovered could cause scanning errors or interfere with accurate color reproduction.

Proceed to “Step 3 — Open the Scan Window” ( 30).

Direction of

insertion

Thumbnails

displayed in

order shown

Guides

2.1

Open the holder

Undo the latches and open the

holder.

FH-869S Holder for Medium-Format Film

The FH-869S can be used to scan medium-format

(120/220, 2¼ or Brownie) ﬁ lm and

59 × 82 mm electron-microscope ﬁ lm. The length of the ﬁ lm strip that can be inserted in

the holder depends on the type of ﬁ lm:

• 6 × 4.5: 1–4 frames • 6 × 6: 1–3 frames • 6 × 7 – 6 × 9: 1–2 frames

Stops

Direction

of insertion

Thumbnails

displayed in

order shown

Arrow

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 88 89

Keine Kommentare

Nikon 9000ED Bedienungsanleitung Seite 37