Nikon 9000ED Bedienungsanleitung PDF herunterladen (Seite 36)

2.3

Insert masking sheets

When scanning a single strip or strips

of different lengths, place the ﬁ lm at

the left end of the holder and cover

any open apertures with the supplied

masking sheets, cutting the sheet to the

appropriate length if necessary. When

scanning a single strip, place the ﬁ lm in

the bottom row and the masking sheet

in the top row.

Masking sheet

When scanning two strips of equal

length, place the ﬁ lm at the left end

of each row. Masking sheets are not

required.

2.4

Position the ﬁ lm

Close the holder without latching it,

and check that the ﬁ lm is correctly

aligned. If necessary, insert a pen

or other pointed object into the per-

forations and slide the ﬁ lm until the

frames are aligned with the apertures.

The perforations can be accessed

through the cutouts at the left end of

the holder.

Positioning Film

Care should be taken to avoid damaging the perforations when positioning the ﬁ lm.

Do not attempt to position the ﬁ lm while the holder is latched. Failure to observe

this precaution could damage the ﬁ lm.

2.5

Latch the holder

Press the holder closed until the

latches click into place. Proceed to

“Step 3 — Open the Scan Window”

(

30).

Cutouts

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 88 89

Keine Kommentare

Nikon 9000ED Bedienungsanleitung Seite 36