Nikon F25B Bedienungsanleitung Seite 44

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 48
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 43
ACCESSORIES
Lens
Hoods
The use
of
a lens hood
is
recommended at
all
times to
prevent extraneous light from striking the lens surface
and causing flare or ghost, and to protect the lens against
damage. Nikon lens hoods come
in
four types, depend-
ing
on the lens: screw-in, snap-on, slip·in and built-in.
They are calculated precisely for each focal-length
Nikkor lens to provide maximum protection against
stray light.
To attach or remove the snap-on hood, first depress the
spring latch- which
is
marked with
an
arrow- and slide
it
in
the direction
of
the arrow. The hood
will
also fit
directly over a screw-in filter,
so
both can
be
used on a
lens
at
the same time.
When
not
in
use, the snap-on hood
can
be
reversed for storage on the lens, and the lens and
its hood can
be
stored together
in
the ever-ready case.
44
Filters
Nikon filters are made
of
optical glass, ground and
polished
so
that both surfaces are optically flat and
parallel. Nikkor lenses and Nikon filters are made for
each other. For best results,
use
Nikon filters on Nikkor
lenses. The filters are available
in
both screw-in and
series mounts, depending on the lens.
Except for the R60, no Nikon filter requires exposure
compensation when used with the Nikon F2SB Photo-
mic.
When
using the R60 filter under tungsten light,
increase the exposure
by
one f-stop more than indicated
by
the exposure meter.
Note:
If
you
wish
to
leave a filter
on
the
lens
to
protect
the
lens
against
accidental
damage,
the
use
of
the L37
or
L37C
filter
is
recommended
.
Seitenansicht 43
1 2 ... 39 40 41 42 43 44 45 46 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare