Nikon EH EL2 Bedienungsanleitung PDF herunterladen (Seite 15)

Frame Counter

The frame counter operates automatically to show how

many frames have been exposed. When the camera back

is opened for loading, the counter is reset to the "S"

(start) position, two frames before "0." Once the

camera is loaded and the back closed, each

film-

advance/shutter-release sequence will cause the frame

counter to advance one position until the maximum 20

or 36 frames have been exposed. The dial of the frame

counter is calibrated with dots (for odd numbers) and

figures (for even numbers), and with settings of "S,"

"20"

and "36" in red.

Shutter Release Button Lock

A special control is fitted around the base of the shut-

ter release button to provide for greater ease of opera-

tion when using the EL2 with the Auto Winder AW-1

mounted for automatic film advance. With the shutter

release button lock, the film-advance lever's meter

ON/OFF and shutter button lock functions are dupli-

cated to enable positioning of the lever flush to the

body while using the Auto Winder. To operate the

camera via the shutter release button lock, simply

switch the lock to the left to reveal the red meter ON

index; in this position, the meter is on and the shutter

button is unlocked for normal release operation. When

not using the Auto Winder, switch the lock back to the

right and operate via the film-advance lever.

Note:

Whenever the camera is stored, be sure that the shutter

release button lock (as well as the film-advance lever) is set to

the "meter-OFF" position to ensure against accidental battery

drain.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 47 48

Keine Kommentare

Nikon EH EL2 Bedienungsanleitung Seite 15