Nikon EH EL2 Bedienungsanleitung PDF herunterladen (Seite 11)

Prior to Shooting

Fold out the rewind crank and turn it gently in the

direction of the engraved arrow until you feel a slight

tension;

this tension indicates that there is no more

slack in the film cartridge. (Be sure not to rewind the

film back into the cartridge.)

Set the shutter-speed dial to one of the fixed-speed set-

tings (see page 13), advance the film via the

film-

advance lever (see page 14) and make two blank ex-

posures to dispose of the initial portion of the film

exposed during loading. While advancing the

film,

check

that the rewind crank turns in the direction opposite

the arrow. Crank rotation indicates that the film has

been loaded properly and is being advanced. Then, fold

the crank flat for film storage.

After advancing the film two frames to dispose of any

exposed

film,

the frame counter at the upper right of

the camera will indicate "0"; now advance the film one

more frame to prepare the camera for taking the first

exposure.

Note:

Setting the shutter-speed dial to one of the fixed-speed

positions (rather than to "A") prior to making blank exposures

will provide for the most rapid loading as this action will pre-

vent the camera from selecting a slow speed, as might be the

case should loading be performed with the lens cap in place.

However, be sure to resetthe dial to "A" if automatic operation

is to be performed.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 47 48

Keine Kommentare

Nikon EH EL2 Bedienungsanleitung Seite 11