Nikon PROSTAFF 7i Bedienungsanleitung PDF herunterladen (Seite 11)

7. Measurement display mode

1. Turn on the power.

2. Press and hold the MODE button, then

immediately press the POWER ON/Measurement

button.

3. Release your finger from the POWER ON/

Measurement button within 2 seconds to switch

the Measurement display mode.

4. Repeat steps 2 and 3 to switch measurement

display mode in rotation.

* If the buttons are not pressed in the correct order,

switching will not take place.

1. Turn on the power.

2. Press and hold the MODE button, then press and hold the POWER ON/Measurement button.

Continue to press and hold both buttons (for more than 2 seconds) until Target Priority modes are switched.

3. Release both buttons after the mode has switched.

If the buttons are not pressed in the correct order, switching will not take place.

[First Target Priority mode/Distant Target Priority mode]

When measuring overlapping subjects, First Target Priority mode displays the distance of the closest subject and

Distant Target Priority mode displays that of the farthest subject.

First Target Priority mode

[

]

Distant Target Priority mode

[

]

This Nikon Laser Rangefinder employs the First Target

Priority/Distant Target Priority switching system.

(Factory default setting is Distant Target Priority mode)

Horizontal Distance

Mode

Actual Distance

Mode

Horizontal

Distance

8. Target priority mode

Actual

Distance

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 63 64

Keine Kommentare

Nikon PROSTAFF 7i Bedienungsanleitung Seite 11