Nikon PROSTAFF 7i Bedienungsanleitung PDF herunterladen (Seite 10)

5. Internal display

Distance

Unit of measure (m/yd.)

Target mark

Laser irradiation mark

Horizontal Distance display mode

Battery condition

First Target Priority mode

Distant Target Priority mode

: Aim at the target you want to measure. Position the target at the center of the reticle.

: Appears while the laser is being irradiated for a measurement.

Do not look towards the objective lens side while this mark is shown.

: "Failure to measure" or "Unable to measure"

* Because the internal display of this product is enlarged by the eyepiece, dust may sometimes be seen.

This will not, however, affect the measurement accuracy.

6. Distance display units

Meter [ ]Yard

[ ]

Measurement results are displayed in yards/meters. (Factory default setting is yard.)

1. Turn on the power.

2. Press and hold the MODE button for more than two seconds. After the display unit has switched, release the button.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 63 64

Keine Kommentare

Nikon PROSTAFF 7i Bedienungsanleitung Seite 10