Nikon WT-2 Bedienungsanleitung PDF herunterladen (Seite 28)

Controlling the Camera

Complete the steps in “Connecting to a Computer” ( 20).

Start Nikon Capture 4 Camera Control on the

host computer and conﬁ rm that is displayed in

the camera’s top control panel.

Control the camera as described in the Nikon Cap ture 4 User’s Man u al.

Any photographs taken while the camera is connected will be recorded

directly to the computer hard disk.

Loss of Signal During Transfer

A loss of signal may interrupt the connection while pictures are being transferred to

Nikon Capture 4 Camera Control. If the POWER LED on the WT-2 is blinking ( 22),

select Off for the Wireless LAN > Wireless LAN system option in the camera setup

menu and then select On again. Transfer will resume when the connection is re-estab-

lished. Do not turn the camera off. Transfer can not be resumed once the camera

is turned off.

Connecting to Multiple Computers

Any computer enabled in the connection list can connect to the camera when running

Nikon Capture 4 Camera Control. Note, however, that attempting to control the cam-

era simultaneously from multiple computers may produce unexpected results. Nikon

recommends disabling the other connections if you are unsure whether the other com-

puters in the connection list are running Nikon Capture 4 Camera Control ( 36).

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 186 187

Keine Kommentare

Nikon WT-2 Bedienungsanleitung Seite 28