Nikon WT-2 Bedienungsanleitung PDF herunterladen (Seite 22)

Setup Using the Connection Wizard

First-time setup can be completed with the help of the Connection Wizard.

Make sure the network is active before starting. To prevent changes to set-

tings from being lost should the camera monitor turn off automatically, use

the optional AC adapter or choose the maximum camera monitor off delay.

Turn the camera on.

Check that Off is selected for Wireless LAN >

Wireless LAN system in the camera setup menu

( 24).

Select PTP / IP for Wireless LAN > Mode ( 24).

In the top level of the wireless LAN menu, press the button to start

the Connection Wizard. A list of available connections will be displayed.

Press the multi selector up or down to highlight the desired connection

and press the multi selector to the right to select it.

쐃

쐇

쐋

쐃 Selected connection is marked with

icon.

쐇 Infrastructure connections are marked with icon,

ad-hoc connections with icon ( 27).

쐋 SS-ID (not displayed if SS-ID is unavailable).

Connection Not Available

If the desired connection is not listed, press the button to search again. If the

connection still can not be found, check settings on the network.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 186 187

Keine Kommentare

Nikon WT-2 Bedienungsanleitung Seite 22