Nikon WT-2 Bedienungsanleitung PDF herunterladen (Seite 11)

Step 1—Connect the WT-2

Turn the camera off.

Open the camera USB connector cover and con-

nect the USB cable to the USB connector.

POW

Pass the cable over the guide on the BL-2 battery-

chamber cover.

POW

Place the camera on the WT-2 and rotate the knob

in the direction shown to fasten the WT-2 to the

camera tripod mount.

POW

Remove the cover protecting the camera power

contact. The cover can be stored in the housing

on the WT-2.

Disconnecting the WT-2

To disconnect the WT-2:

1 Turn the camera off.

2 Disconnect the USB cable.

3 Rotate the knob clockwise to unscrew the WT-2 from the camera tripod mount.

4 Replace the cover on the camera power contact.

Setup

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 186 187

Keine Kommentare

Nikon WT-2 Bedienungsanleitung Seite 11