Nikon SBV5121 Bedienungsanleitung PDF herunterladen (Seite 18)

Introduction Installation Troubleshooting Glossary License

SBV5121 VoIP Cable Modem User Guide 10

To connect the telephone line, plug a phone wire into the Tel 1 connector. You can also connect a second

telephone line to the Tel 2 connector.

Setting Up a USB Driver

The following subsections describe setting up a USB driver. Before connecting a PC to the USB port, perform the

appropriate procedure for your Windows version:

• “Setting Up a USB Driver in Windows 98 Second Edition” on page 11

• “Setting Up a USB Driver in Windows 2000” on page 15

• “Setting Up a USB Driver in Windows Me” on page 18

• “Setting Up a USB Driver in Windows XP” on page 19

When you finish setting up the USB driver, you can continue with “Configuring TCP/IP” on page 20.

The SBV5121 VoIP cable modem USB driver does not support Macintosh or UNIX computers. For those systems,

you can connect through Ethernet only.

Caution!

To reduce the risk of fire, use only No. 26 or larger UL Listed or CSA Certified Telecommunication

Line Cord to connect a telephone line to your SBV5121 VoIP cable modem.

Do not connect both the Ethernet and USB cables to the same computer. Connect to either Ethernet

or USB.

Contact your cable provider before connecting your VoIP cable modem to your existing telephone wiring.

Do not connect the telephone wire to a traditional telephone (PSTN) service.

Be sure the phone connectors are neither connected together nor connected to wall jacks on the

same network.

Caution!

Be sure the SBV5121 VoIP Cable Modem CD-ROM is inserted in the CD-ROM drive before you plug

in the USB cable.

CABLE

+12VDC

USB

TEL 1

TEL 2

ETHERNET

Either/o r

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 57 58

Keine Kommentare

Nikon SBV5121 Bedienungsanleitung Seite 18