Nikon MOTORMESH 4300 Bedienungsanleitung PDF herunterladen (Seite 18)

Product Introduction

July 2007

1-6

Antenna Type Two (2) omni directional, 8 dBi (for 2.4 GHz Radio) and 10 dBi (for 5.8

GHz Radio)

Antenna Connector N-Type

Routing

Routing Engine MeshConnex Layer 2 routing with Layer 1 situational-awareness

Routing Protocol Patented, hybrid proactive/reactive routing (low latency & fast route

convergence)

IEEE 802.11s Support Upgradeable to IEEE 802.11s standard via OTA software updates

Network

Network Management Software MeshManager Element Management System via secure SNMP v.3

Network Interface 10/100Mbps Ethernet (RJ-45) port with surge suppression

Network Segmentation

Multiple SSIDs with VLAN mapping

Quality of Service (QoS) 802.11e, EDCF, 802.11p and the IP precedence of DSCP (ToS) bits

Security

Virtual LAN (VLAN) Supports up to sixteen (16) per node, or 4094 per network

Client Encryption Support WEP, WPA (TKIP) and WPA2 (AES, 802.11i)

Internodal Encryption Intra-Mesh Security

Authentication 802.1X (Infrastructure/Client) and MAC address hardware authentication

Power

Power Requirements 90-264 VAC (with +/- 20% variation at 47 to 63 Hz)

12V +/- 10% VDC input, certified LPS power supply (orderable option)

Power Connector AC power cord, 12 ft

Power Consumption 15W (with both radios operating)

22.2W (with Canopy® Connect PoE operational)

29.4W (with IEEE 802.3af Standard PoE device)

Power over Ethernet (PoE) Canopy and IEEE 802.3af support available

Physical

Dimensions 9”x 6”x 3.5” (23.1cm x 15.2cm x 8.9cm)

Weight 4.5 lbs (2.04kg)

Packaging Outdoor, all-weather enclosure (NEMA 4)

Mounting 3" (7.62cm) diameter post mounting

Environment

Temperature Range -30 to +60 °C

Humidity 0 to 95%, non-condensing

Certifications FCC Part 15 & 90, UL, CSA

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 73 74

Keine Kommentare

Nikon MOTORMESH 4300 Bedienungsanleitung Seite 18