Nikon MOTORMESH 4300 Bedienungsanleitung PDF herunterladen (Seite 16)

Product Introduction

July 2007

1-4

MOTOMESH Duo 4300 Device Specifications

The following specification tables apply to the MOTOMESH Duo 4300-49, 4300-58, and 4300-54

Infrastructure Devices.

Table 1-1 MOTOMESH Duo 4300-49 Device Specifications

Radio Characteristics

Primary Radio Operating Freq. (GHz) 2.400 to 2.483

Secondary Radio Operating Freq. (GHz) 4.940 to 4.990

Wi-Fi Support 802.11b/g at 2.4GHz; 802.11a at 4.9GHz

RF Modulation CCK (802.11b) / OFDM (802.11a/g)

2.4 GHz Portion 4.9 GHz Portion

Transmit Power (Maximum) 35 dBm EIRP 34 dBm EIRP

Receive Sensitivity 801.11b: -92 dBm (at 11 Mbps)

to -100 dBm (at 1 Mbps)

801.11g: -78 dBm (at 54 Mbps)

to -95 dBm (at 6 Mbps)

802.11a: -77 dBm (at 27 Mbps) to -93

dBm (at 3 Mbps)

Power Control 1dB increments

Antenna Type Two (2) omni directional, 8 dBi (for 2.4 GHz Radio) and 11 dBi (for 4.9

GHz Radio)

Antenna Connector N-Type

Routing

Routing Engine MeshConnex™ Layer 2 routing with Layer 1 situational-awareness

Routing Protocol Patented, hybrid proactive/reactive routing (low latency & fast route

convergence)

IEEE 802.11s Support Upgradeable to IEEE 802.11s standard via OTA software updates

Network

Network Management Software MeshManager Element Management System via secure SNMP v.3

Network Interface 10/100Mbps Ethernet (RJ-45) port with surge suppression

Network Segmentation

Multiple SSIDs with VLAN mapping

Quality of Service (QoS) 802.11e, EDCF, 802.11p and the IP precedence of DSCP (ToS) bits

Security

Virtual LAN (VLAN) Supports up to sixteen (16) per node, or 4094 per network

Client Encryption Support WEP, WPA (TKIP) and WPA2 (AES, 802.11i)

Internodal Encryption Intra-Mesh Security

Authentication 802.1X (Infrastructure/Client) and MAC address hardware authentication

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 73 74

Keine Kommentare

Nikon MOTORMESH 4300 Bedienungsanleitung Seite 16