Nikon SB-910 Bedienungsanleitung PDF herunterladen (Seite 87)

E–5

Functions

Setting flash head tilting/rotating angles, and

choosing a reflecting surface

Good results are most easily achieved when the flash head is tilted up to use the •

ceiling as a reflecting surface.

Rotate the flash head horizontally to get the same effect when the camera is held •

in the vertical position.

Illumination can be softened further when the light is bounced off a ceiling or •

wall behind the camera, as opposed to in front of the camera.

Select white or highly reflective surfaces to bounce the light off. Otherwise, •

image colors will be influenced by the color of the reflecting surface.

Take care not to let light from the flash unit illuminate the subject directly. •

The effective distance between the flash head and the reflecting surface is •

approx. 1 m to 2 m (3.3 ft to 6.6 ft) depending on photographic conditions.

If the reflecting surface is not close enough, a piece of A4-size white paper can •

be used instead. Please check the subject is exposed to the bounced light before

taking a picture.

1-2m

90º

White ceiling

Flash head tilted up 75˚

while rotated 180˚

Lightproof white paper

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 135 136

Keine Kommentare

Nikon SB-910 Bedienungsanleitung Seite 87