Nikon COOLPIXP7100 Bedienungsanleitung PDF herunterladen (Seite 50)

The Basics of Shooting and Playback

Step 4 Focus and Shoot

1 Press the shutter-release button halfway, i.e.,

press the button slightly until you feel

resistance.

• When you press the shutter-release button halfway, the

camera sets the focus and exposure (shutter speed and

aperture value). Focus and exposure remain locked

while the shutter-release button is pressed halfway.

• The camera automatically focuses on the subject in the

center focus area. When the subject is in focus, the

focus area lights in green, and the AF/access lamp next

to the viewfinder lights.

• When the digital zoom is in effect, the camera focuses

on the subject at the center of the screen, and the focus

area is not displayed. When the subject is in focus, the

AF/access lamp lights in green.

• When the shutter-release button is pressed halfway and

the focus area blinks red or the AF/access lamp flickers,

the camera is unable to focus. Change the composition

and press the shutter-release button halfway again.

2 Press the shutter-release button all the way,

i.e., press the button the rest of the way down.

• The shutter is released and the picture is recorded.

• If you press the shutter-release button with too much

force, the camera may shake, causing images to be

blurred. Press the button gently.

B During Recording

• While the AF/access lamp or the indicator showing the number of exposures remaining is

blinking, images are being recorded. Do not open the battery-chamber/memory card slot

cover. Cutting the power or removing the memory card in these circumstances could result in

loss of data or in damage to the camera or card.

• Depending on the settings or shooting conditions, the image recording time may take longer

than usual (F11).

1/250

1/250 F5.6

F5.6

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 259 260

Keine Kommentare

Nikon COOLPIXP7100 Bedienungsanleitung Seite 50