Nikon SB-30 Bedienungsanleitung PDF herunterladen (Seite 32)

Exposure compensation

Adjusting the SB-30’s flash output is possible by using the Exposure compensation switch when the

Mode selector dial is set to Non-TTL auto, M1/32, or M1/8.

Set the Exposure compensation switch to +1/2 position to make the main subject brighter, or to –1/2 to

make the subject darker.

With COOLPIX cameras, you can adjust the flash output by checking the brightness of the images on

the monitor, then reshoot.

Exposure compensation switch

+1/2: Increases the flash output by +1/2 EV to make the subject brighter

0: No compensation. Set the switch to zero (0) when no exposure

compensation is desired.

–1/2: Decreases the flash output by –1/2 EV to make the subject darker

• Making exposure compensation using the switch is not possible, if the Mode selector dial is set to the TTL

auto flash, M1/1, or Wireless slave mode.

SB-30 -E 01.08 2002.12.26 17:23 ページ3 0

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 138 139

Keine Kommentare

Nikon SB-30 Bedienungsanleitung Seite 32