Nikon SB-30 Bedienungsanleitung PDF herunterladen (Seite 22)

Wireless slave flash shooting

In this section, the SB-30 is used as a slave flash unit that starts and stops firing in sync with the master

Speedlight mounted on the camera or the camera’s built-in Speedlight. With the SB-30, the following

types of wireless slave flash shooting can be performed.

• The Standby function does not work if the Mode selector dial is set to the Wireless slave flash mode.

Take care that the power remains on and is consuming.

Shooting a distant subject using cameras such as the COOLPIX that have a built-in Speedlight

(P. 22)

By placing the camera and the SB-30 side-by-side to fire the SB-30 in sync with the built-in Speedlight,

you can illuminate a distant subject, creating a picture not possible when using the built-in flash by

itself.

Using the SB-30 as a slave flash unit placed away from the camera (p. 24)

In multiple flash, when the SB-30 is used away from the camera, you can create more natural-looking

pictures with sufficient illumination throughout the picture.

Softening shadows cast on the wall by the master flash unit or lightening the background (p. 26)

By using the SB-30 at full (M1/1) output, you can eliminate unattractive shadows or lighten the

background to create more natural-looking pictures.

Multiple flash operation using the infrared remote commander (p. 27)

With the built-in infrared filter in place, the SB-30 operates as an infrared remote commander to trigger

other slave flash units.

Illuminating a distant subject using the SB-30 and cameras such as the COOLPIX

SB-30 -E 01.08 2002.12.26 17:23 ページ2 0

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 138 139

Keine Kommentare

Nikon SB-30 Bedienungsanleitung Seite 22