Nikon SB-30 Bedienungsanleitung PDF herunterladen (Seite 14)

Auto flash modes

Two auto flash modes are available with the SB-30: TTL auto flash and Non-TTL auto flash

TTL auto flash mode

This mode is possible with SLRs cameras compatible with TTL auto flash. At

the instant the shutter is released and the SB-30 starts firing, the camera’s

built-in TTL auto flash sensor measures the flash illumination through-the-lens

that is reflected back from the subject and adjusts the SB-30’s flash output,

providing the correct exposure.

For usable cameras, refer to “Usable cameras and available flash modes”

(p. 10).

Available TTL auto flash modes such as Multi-Sensor Balanced Fill-Flash, Matrix Balanced Fill-Flash,

Center-Weighted Fill-Flash/Spot Fill-Flash, or Standard TTL flash vary, depending on the cameras and

lenses in use. For details, refer to your camera’s instruction manual.

• 3D Multi-Sensor Balanced Fill-Flash is not possible, because the SB-30 does not fire a series of preflashes

(Monitor Preflash).

• The D-TTL auto flash mode is not possible with the SB-30.

Using the SB-30 with SLRs cameras

As a handy Speedlight

SB-30 -E 01.08 2002.12.26 17:23 ページ1 2

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 138 139

Keine Kommentare

Nikon SB-30 Bedienungsanleitung Seite 14