Nikon SpeedlightINSTRUCTION MANUAL
—BASIC OPERATION—continued*0^ Set the lens' aperture ring to an appropriate f / number.In the example, f/4 is selected.10. Set the shooting mode
12. Watch the ready-lightAs soon- as the LED ready-light comes on, the flash unit is ready to fire.1 ' t 113. Take the picture.When the sh
CX>NTROLS IN DETAILNikon FE/FM2/FM Motor Drive MD-4Motor Drive----- — Nikon F3/F3 High-Eyepoint/FG/MD-11/MD-12/MD-14 EM/F2,Motor Drive MD-2/MD-3/
Bracket Mounting Adapter ®To detach the flash unit for off-camera flash operation, push the release/locking wheel @ to the left and while holding it,
Shutter Speed DialTo get proper synchronization, set the camera's shutter speed dial as shown in the chart below. (For details, refer to your cam
—CONTROLS IN DETAIL-continued64032080 40800400200’ 1005026500250125Exposure Calculator Dial @The exposure calculator dial on the back of the SB-14 hel
ti 6П'a subject more than 5.6m (18 ft.) away, the only usable f/stop is f/4.On the other hand, the thin color-coded lines (3)with "W" i
—CONTROLS IN DETAIL-continuedFor Manual OperationSet the ASA/ISO dial and simply read off the f/number which appears directly above the flash-to-subje
Sensor Unit SU-2 0The Sensor Unit SU-2 controls the operation of the SB-14. It has five settings to choose from.At the Three Auto PositionsTo shoot on
NOMENCLATURE® Wide-Flash Adapter SW-5@ Flash head® Shooting mode selector® Sensor Unit SU-2® Sensor socket® Sync/multiple flash sockets@ Sync Cord SC-
Note: Although the SB-14 operates with maximum light output at the S position, be sure to set the camera's shutter speed dial at slower than
CONTROLS IN DETAIL-continuedReady-Light (Built into the back of the SB-14's flash head is a ready- light which comes on as soon as the flash unit
Open-Flash Button @The red open-flash button is used to fire the flash unit manually without having to trip the camera's shutter. In this manner,
or reset the Sensor Unit SU-2 to a color-coded position calling for a wider aperture.17
CONTROLS IN DETAIL-continuedFlash Head®The SB-14's movable flash head can be tilted back up to 120° and rotated 120° to the left and 120° to the
Sync/Multiple Flash Sockets ®Two standard Nikon screw-type terminals are provided on the Speedlight SB-14. Either terminal can be used to connect the
—CONTROLS IN DETAIL-continuedWide-Flash Adapter SW-5 0The angle of illumination of the SB-14 by itself covers the picture angle of a 28mm wideangle le
TIPS ON AUTOMATIC FLASH SHOOTING-Subject's ReflectivityWhen you shoot a dark subject (one with low reflectivity), reduce the aperture selected by
ACCESSORIES-----------------------------DC Unit SD-7Accepting six C-type batteries, the SD-7 is designed to be used as a power source for both the Nik
TTL Sensor Cord SC-12One meter long, this cord allows the SB-14 to be used with the Nikon F3 or F3 High-Eyepoint camera for automatic through-the-len
"RED EYE'"Red eye," an optical phenomenon in which a subject's eyes appear red in photographs taken with a flash unit, is
OPTIMUM BATTERY PERFORMANCE1. New batteries: Between manufacturing and first use, all batteries exhibit some drain. Therefore, care should be taken
SPECinCATIONSGuide number(ASA/ISO 100 and meters) 32 (22 with Wide-FlashAdapter SW-5)(ASA/ISO 25 and ieet) Angle of coveragePower source52 (36 with Wi
DimensionsWeightAccessories providedApprox. 217mm(H)x 94mm(W)x91mm(D) Approx. 515g (with the Sensor Unit SU-2)Approx. 290g (Bracket SK-5 only)Sensor U
27
iMikoti)NIPPON KOGAKU K.K.No reproduction in any form of this booklet, in whole or in part (except for brief quotation in critical articles or reviews
f/stop indicators with wide-flash adapter(thin color-coded lines) @
CONTENTS- - - - - - - - - - - - - - - - - - - - - - - - - -NOMENCLATURE...2—3FOREWORD...
FOREWORDThe Nikon SpeedlJght SB-14 is a compact and lightweight electronic flash unit having a host of useful features.With coverage mat
BASIC OPERATION2 Attach the bracket @ to * the camera.Screw the bracket's attachment screw @ into the camera's tripod socket to secur
BASIC OPERATION - continued4, Attach the sync cord ©.Screw one end of the Sync Cord SC- 11 into either of the flash unit's sync/ multiple flash s
Set the camera's shutter speed for proper synchronization.Set the shutter speed dial to the proper synchronization speed for electronic fla
Kommentare zu diesen Handbüchern