Nikon COOLPIX S810c Spezifikationen Seite 100

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 228
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 99
74
Recording and Playing Back Movies
B Recording Movies
Memory cards with an SD Speed Class rating of 6 or faster are recommended when
recording movies (F20). Movie recording may stop unexpectedly when memory
cards with a lower Speed Class ratings are used.
Digital zoom degrades image quality.
In some rare cases, movie recordings may capture the sounds of the camera itself,
such as those made by the shutter-release button, the zoom control, the
movement of the lens during zoom, autofocus, vibration reduction, or aperture
control when the brightness changes.
The following phenomena may be seen in the monitor while recording movies.
These phenomena are saved in the recorded movies.
- Banding may occur in images under fluorescent, mercury-vapor, or sodium-
vapor lighting.
- Subjects that move quickly from one side of the frame to the other, such as a
moving train or car, may appear skewed.
- The entire movie image may be skewed when the camera is panned.
- Lighting or other bright areas may leave residual images when the camera is
moved.
When recording or playing back movies, colored stripes (interference patterns or
moiré) may appear on subjects that have a regular, repeating grid, such as pattern
of weave in clothing or windows in a building, depending on the shooting
distance or zoom ratio. This phenomenon occurs when the subject’s pattern
interferes with the camera sensor grid, and it does not indicate a malfunction.
B Notes About Camera Temperature
The camera temperature may increase significantly when used for an extended
period of time for movie recording, etc., or when used in places with high ambient
temperature.
If the camera becomes extremely hot while recording a movie, the camera
automatically terminates recording.
The camera monitor displays the number of seconds remaining (B10s) until
automatic termination is activated.
After movie recording is terminated, the camera turns off.
Wait until the internal temperature decreases before using it again.
B Notes About Autofocus for Movie Recording
When shooting a subject that is not suitable for autofocus (A62), the camera may
not be able to focus properly on the subject. Follow the procedure below if you are
trying to shoot this type of subject for movies.
1. Set Autofocus mode in the movie menu to A Single AF (default setting)
before starting movie recording.
2. Frame a different subject (positioned at the same distance from the camera as the
intended subject) in the center of the frame, press the shutter-release button
halfway, modify the composition, and press the shutter-release button all the way
down.
Seitenansicht 99
1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 227 228

Kommentare zu diesen Handbüchern

Keine Kommentare