Nikon 9350 Bedienungsanleitung Seite 47

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 55
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 46
3-9
4. Focus the objective lens as needed to optimize the image
sharpness.
3.1.3.2 Canon EOS
The AstroScope 200mm Catadioptric lens has no aperture. It is
permanently fixed at f/1.3. Since the camera has no electronic
communication with this lens, you must manually set the camera’s
electronics to f/1.8 to attain correct exposure metering.
1. Install the 200mm Catadioptric Lens with EOS-N onto
the camera.
2. Set the ISO to 1000 or higher.
3. Set the camera to “Manual Exposure” mode.
4. Set the aperture to f/1.8.
5. Set the shutter to 1/30 as a minimum speed.
6. Use the camera’s metering to attain the correct exposure.
7. Focus the lens as needed.
3.1.3.3 9350 Bracket Series
1. Install the 200mm Catadioptric lens directly onto the
EPA along with the CIU.
2. Focus the lens as needed.
3.1.3.4 Canon XL-1S
The Canon XL-1S camcorder can use the 200mm Catadioptric lens.
The EOS-N adapter is required along with the Canon XL-EOS
Adapter. The AstroScope XL pair is not used.
1. Remove the Canon 16x zoom lens from the camcorder.
2. Install the Canon XL-EOS adapter on to the camcorder.
3. Install the EOS-N adapter on to the 200mm Lens along
with a CIU.
4. Secure the Lens and EOS-N to the XL-EOS adapter.
5. Set the camcorder to “Manual Exposure” mode.
6. Set the aperture to f/1.6.
7. Set the shutter speed to 1/30 second.
8. Focus the Lens as needed.
3.1.3.5 9350BBA-C Relay Lens Adapter
1. Install the 200mm Catadioptric Lens directly onto the
BBA-C along with a CIU.
2. Focus the lens as needed.
3.1.3.6 9350 Pocket Scope
1. Install the 200mm Catadioptric Lens directly onto the
EPA along with a CIU.
2. Turn the EPA on.
3. Focus the lens as needed.
Seitenansicht 46
1 2 ... 42 43 44 45 46 47 48 49 50 51 52 53 54 55

Kommentare zu diesen Handbüchern

Keine Kommentare