Nikon DX-TL4516E Bedienungsanleitung PDF herunterladen (Seite 37)

Warnings and CALL OUT output

ENGLISH

Warning Display

CALL OUT

output

Cancelling

the warning

Log number

Countermeasure

LOG54 #7

LOG13 #8

LOG33 #8

LOG43 #8

LOG73 #8

LOG23 #8

LOG14 #8

LOG74 #8

LOG24 #8

LOG34 #8

LOG44 #8

LOG55

LOG6200

LOG5100

LOG5200

LOG5201

LOG5300

LOG3500#5

LOG7500#6

LOG3600#5

LOG7600#6

LOG5101

LOG5102

LOG5103

Fixed

None

Fixed

None

Fixed

None

–

No Camera Signal

Camera signal is lost or distorted.

Please check the camera and cable

connection.

It can use as it is though a slight error

occurred.

System suspended due to unstable

processing. Recording will be resumed.

HDD was disconnected.

System suspended due to unstable

processing. Start operation again.

The recorder detected the data altered or data

recorded by other recorder.

Recorder detected technical problems

on the device.

The recorder has been rebooted. The problem

is not critical, but check the recorder.

Internal temperature is getting too high,

check the ventilation of the recorder.

Internal temperature is getting too high,

stop the operation of the recorder

immediately.

The fan of the recorder needs to be checked.

Copying data stopped because of new record

overwrites the old data.

New record will soon overwrite the old data

in copying.

Stop the recording, if you want to continue the

copying.

(NONE)

• Check whether the unit and

camera are properly connected

and turned on.

• Check whether the video signal is

being properly outputted.

• Check whether the camera with

no video signal input is set for

operation.

• Continue the operation when

there is no abnormality.

• When the error occurs

continuously, check the

HDD/media and cable and then

restart the unit.

• Restart the unit.

• Check the unit.

• Turn off the power and change

the installation condition.

• Turn off the power and change

the installation condition.

• Turn off the power and stop

using.

• Stop HDD recording to continue

copy/backup.

• Stop HDD recording to continue

copy/backup.

• Stop copy/backup to continue

HDD recording.

• Restarts by watchdog operation

or for self-recovery.

Stop recording.

Output video

signals.

Click "Clear

Warning" or press

the E button.

Automatically

clears after 1

minute.

Click "Clear

Warning" or press

the E button.

Automatically

clears after 1

minute.

Click "Clear

Warning" or press

the E button.

Click "Clear

Warning" or press

the E button.

Click "Clear

Warning" or press

the E button.

Click "Clear

Warning" or press

the E button.

Click "Clear

Warning" or press

the E button.

Lower the

temperature.

Click "Clear

Warning" or press

the E button.

Rotate the fan.

Click "Clear

Warning" or press

the E button.

Click "Clear

Warning" or press

the E button.

Regarding LOG14 : Displays during recording. The system shuts down once and then resumes recording. (The error HDD is

automatically deleted from the recording device. The recording is continued until all the registered HDDs are used up.)

Regarding LOG24 to 74: Displays during copying or playback. The playback or copy stops because the system shuts down. Carry

out playback or copy again.

Regarding LOG 54 : Displays during recording when the video signal is not existed for the camera being recorded for 2 seconds

or more. This warning may not be displayed for the recording of which recording time is less than 2 seconds.

1 2 ... 32 33 34 35 36 37

Kommentare zu diesen Handbüchern

Keine Kommentare

Nikon DX-TL4516E Bedienungsanleitung Seite 37

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto DVR Nikon DX-TL4516E