Nikon DX-TL4516E Bedienungsanleitung PDF herunterladen (Seite 2)

Caution and care

HEAVY OBJECTS SHOULD NEVER BE PLACED ON THE UNIT (E.G., MONITOR)

NEVER TOUCH OR INSERT ANY OBJECT INSIDE THE UNIT

Touching the inside of the cabinet or inserting foreign objects of any kind through the disc loading slot or ventilation holes not

only creates a safety hazard but can also cause extensive damage.

PROTECT THE POWER CORD

Damage to the power cord may cause ﬁre or shock hazard. If the power cord is damaged, turn OFF the MAIN switch and

carefully unplug the cord by holding the main plug.

If this unit is moved with the power on status, the built-in HDD may be damaged. Conﬁrm that more than one minute have

passed since the power cord and the connecting cords were disconnected, then move this unit. Make sure to take the disc out

and close the disc loading slot.

UNPLUG THE POWER CORD DURING A LONG ABSENCE

Turn off the power and unplug the power cord during a long absence.

MAINTAIN GOOD VENTILATION

Do not obstruct the many ventilation holes on the unit. For maximum ventilation, leave some space around the unit and place

the unit on a hard level surface only, and ensure it is not covered during use. Heavy objects should never be placed on the

unit.

WHEN NOT IN USE

When not in use, always eject the disc and turn OFF the MAIN switch.

CABINET CARE

Never use petroleum-based cleaners. Clean with a soft cloth moistened with soap and water and wipe dry.

PVC cables or leads should not be left in contact with the cabinet surface for long periods.

INSTALLATION LOCATION

For excellent performance and lasting reliability install in a location that is:-

1. Well ventilated, out of direct sunlight and away from direct heat.

2. A solid vibration-free surface.

3. Free from high humidity, excessive dust and away from magnetic ﬁelds.

4. Please ensure that the ventilation fan located on the unit’s back panel is not blocked.

UNSUITABLE LOCATIONS

Placing the unit in the following places might shorten the product life:

• Extremely cold places, such as refrigerated warehouses and ice houses

• Places where excessive hydrogen sulﬁde is likely to be generated, such as hot-springs areas

• Places or locations with salt air environment.

THIS EQUIPMENT DOES NOT PROVIDE CONNECTION FOR USED WITH OUTDOOR OR CABLE DISTRIBUTION

SYSTEMS.

NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

DO NOT PLACE HEAVY OBJECT ON THIS UNIT.

DO NOT STEP ONTO THIS UNIT.

DO NOT PLACE ANY OBJECTS IN FRONT OF THE DISC LOADING SLOT.

The unit may drop or fall by losing its balance. It may cause injury or failure of the unit.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

THIS APPARATUS MUST BE GROUNDED.

This unit complies with the requirements of the EC Directive 89/336/EEC, “EMC Directive” and 73/23/EEC, “Low Voltage

Directive”, as amended by Directive 93/68/EEC. The requirements for the susceptibility according to EN 55024 and the

requirements for interference according to EN 55022 are observed for the operation on residential areas, business, light

industrial premises and in small scale enterprises, inside as well as outside of the building. All places of operation are

characterised by their connection to the public low voltage power supply system. This unit is manufactured in accordance

with EN 60950.

MAINS LEAD CONNECTION

The mains lead on this Unit is ﬁtted with a non-rewireable mains plug, incorporating a 5A fuse. If you need to replace

the fuse, use a 5A fuse approved by BSI or ASTA to BS 1362, ensuring you reﬁt the fuse cover. If the mains plug is not

suitable for the sockets in your home, and you require to remove the plug, remove the fuse, cut off the plug then dispose

of the plug immediately, to avoid a possible electric shock hazard. To reﬁt a new plug, follow these instructions; Green-

and-yellow: Earth, Blue: Neutral and Brown: Live. As the colours in the mains lead of this Unit may not correspond with the

coloured markings identifying the terminals in your plug, proceed as follows.

• The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the

letter E or by the safety earth symbol or coloured green or green-and-yellow.

• The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

• The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

1 2 3 4 5 6 7 ... 36 37

Kommentare zu diesen Handbüchern

Keine Kommentare

Nikon DX-TL4516E Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto DVR Nikon DX-TL4516E

Verwandte Produkte und Handbücher für Nein Electrolux EVD29900AX